Which type of driveway is best?

A concrete driveway is the most durable and the most expensive. There are several different types of driveway materials commonly available for your home—including gravel, asphalt, and concrete.

The five best materials to pave your driveway with

  1. Exposed aggregate. This is a type of concrete finish obtained by removing a thin layer from the top of laid concrete to reveal the pebbles, shells, stones and/or sand near the surface.
  2. Concrete.
  3. Bluestone pavers.
  4. Clay brick pavers.
  5. Timber sleepers.

Likewise, what are the different types of driveways? Nowadays, there are a variety of materials to choose from for your driveway as well as different types.

  • A. Types. Concrete Driveway. Asphalt Driveway. Brick Driveway. Gravel Driveway. Dirt Driveway. Crushed Stone Driveway. Cobblestone Driveway.
  • B. Shapes. Straight. Curved. U-Shape. Circular Driveway. Y-Shape Driveway.

Moreover, what type of driveway is cheapest?

Pound for pound, aggregate is the cheapest of these four common driveway materials. A basic gravel driveway can cost as little as $0.50 per square foot – an order of magnitude less than a professionally installed asphalt, stone, or concrete driveway. Durability. Aggregate is extremely durable.

What is the best type of gravel to use for a driveway?

Top layer choices for gravel driveways might include crushed shale, limestone, granite and concrete, along with other types of gravel in various colors to meet your aesthetic needs.

How much should a driveway cost?

The national average cost to install a concrete driveway is about $6 a square foot. According to Joe Pilson, owner of Complete Concrete in Denver, Colorado, a typical driveway big enough for one car and room to turn around is about 500 square feet, with an average total project cost of $3000.

How do you design a driveway?

Consider Needs and Layout. The first step in designing a driveway is assessing your needs and your property’s layout. Choose Shape. Once you have an idea of what you need and want in your driveway, you can choose a shape. Choose Materials. Accessorize.

What materials can be used for a driveway?

The four most popular driveway materials today are concrete, asphalt, gravel, and pavers. How do you decide on the best one for your home? Sizing them all up may seem as baffling as comparing apples to oranges, but don’t panic. Our detailed guide to each type of driveway material will simplify your choice.

What kind of brick do you use for a driveway?

Concrete Pavers Perhaps the most popular option for paver driveways is to use pavers that are made from concrete molded into the shapes of bricks. Concrete paver driveways usually have better longevity than clay bricks; lifespans of 25 to 50 years are common.

Are gravel driveways a good idea?

Gravel driveways are very popular in some areas, and very hard to find in others. In many rural areas, gravel is the material of choice for both driveways and roadways. Gravel is much less expensive for long driveways than most other driveway materials, and it can last for generations with regular maintenance.

How thick should a concrete driveway be?

Use fill material to make sure your base is thick enough. Usually driveways are at least 4 inches (10 cm) thick; for heavier vehicles or difficult to stabilize soil conditions, thicker concrete is suggested.

Are resin driveways cheaper than block paving?

With regard to cost, block paving prices can vary dramatically, even for the same product, whereas resin bonded stone prices are far more consistent and generally considerably cheaper than a block paving alternative where there is a suitable solid substrate to work with.

How much is a brick driveway?

A typical two-car driveway is 16 feet wide and 38 feet long without curves or slope, for a total surface area of 610 square feet. It will typically cost $19.08 per square foot to be professionally supplied and paved with brick pavers. The DIY Material Cost is around $3.96 per square foot.

How do I make my gravel driveway solid?

Stake out the path of the driveway. Clear grass or topsoil from staked area. Calculate cubic yardage of gravel needed for each driveway layer. Schedule and prepare site for gravel delivery. Level the ground along the path of the driveway. Spread and compact the base layer of gravel. Add middle layer of driveway gravel.

How much does it cost to put in a paved driveway?

The average cost of a concrete driveway, by comparison, is almost $7,400. Other sources estimate the cost to install an asphalt driveway to be between $2,300 and $10,300. Homeowners typically pay per square foot. Reibling adds the average cost per square foot is between $3.50 and $4.50.

How can I make my driveway look nice?

There are several ways to make your driveway more appealing, possibly becoming the envy of your neighborhood. Pressure Wash. Repair any broken pavers or bricks, fill any cracks. Add a border. Staining concrete driveways. Upgrade your driveway. Improve your landscaping. Lighting. Decorative Mailbox.

Is it cheaper to pave or concrete a driveway?

Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation. Finishes, details and stains can increase the price tag to as much as $15.00 per square foot.