# How long does it take to fill a 12ft pool?

The general rule of thumb is that a single garden hose will raise the water level one inch per hour once the water level has reached the shallow end of the pool. This means that the average pool will fill in 24-72 hours depending on the volume of the pool.

Pump flow rate: 330 gallons, System flow rate: 300 gallons. Ready for water in 10 minutes, simply spread out on level ground, inflate the top ring, fill the pool with water, and enjoy the fun.

Secondly, how long does it take to fill up a pool? For others that are filling a much larger pool it could take multiple days until your pool water has reached capacity. Assuming your water pressure is pumping at 8 gallons per minute (480 gallons per hour) through your outside water hose, it would take 31.25 hours to fill a 15,000 gallon swimming pool.

In this manner, how long does it take to fill a 12×30 pool?

EASY SET POOLS
Answer : No, but if you have a ground cover, you can roll the pool up inside it.
Question : How long does it take to fill the pool with water?
Answer : 2-5 hours, depending on which pool, hose size and water pressure.

How long does it take to fill a 18ft pool?

At 540 gallons per hour, it will take about nine hours to fill a 5,000-gallon pool with your 1/2-inch hose. If you have a larger hose, the time to fill your pool will be reduced.

### Does the Fire Department fill swimming pools?

News flash: the fire department will not send a truck to your house to fill up your swimming pool. Water from fire trucks is not potable or suitable for swimming. The department does not clean the inside of its tanks … ever.

### Can you fill a pool overnight?

Hi, with 12″ of water in the pool you should be fine to let it fill all night. The stretching should be done and the liner tight against the wall. If so, let it go. There is some air gap between the liner and the wall in a few areas.

### Will my pool fill faster with two hoses?

So when both hoses are on, they fill the pool at a rate of 150 parts per hour. The second hose since it fills the entire pool in two hours, can be said to fill the pool at a rate of 50 parts per hour. So when both hoses are on, they fill the pool at a rate of 150 parts per hour.

### How can I fill my pool fast?

Fill your pool until the water reaches about the middle of a surface skimmer, covering the pool water filter inlet slightly. This may take from a few hours to a couple of days, depending on if you are using a garden hose or having your water delivered.

### What is the capacity of my pool?

Length x width x depth x 7.5 = volume (in gallons) Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

### How much does it cost to fill a swimming pool?

The average price to fill in an inground swimming pool is between \$3,500 and \$5,000. Read more about pool removal costs: The Homeowner’s Guide to Swimming Pool Demolition and Removal.

### How long does it take to fill a 3000 gallon pool?

A: A standard garden hose releases approximately nine gallons per minute. That is roughly 540 gallons an hour. For example, if you have a 20,000-gallon pool, it will take about 37 hours to completely fill. Roughly, it takes about two days to fill your pool completely.

### Can I fill my pool with my well?

If your well water is just OK (meaning it’s a little cloudy and has a bit of an odor), you still may want to fill your pool with it. Certainly this water will take some extra start-up chemicals to get it right, but it’ll still be more cost-effective than filling it with municipal water.

### How many gallons is a 12 by 30 pool?

Standard In-Ground Pool Volumes in Gallons by Size 12×24 7,600 9,700 14×28 10,300 13,200 15×30 11,800 15,200 16×32 13,400 17,300

### How high should I fill my pool?

Ideal Water Height Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer. The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned.

### How many gallons is an Intex 10×30 pool?

Intex Metal Frame Pool holds 1,185 gallons at 90 percent capacity. 530 gallon per hour filter pump. Ground Fault Circuit Interrupter is an added safety feature. Ready for water in 30 minutes.

### How do you fill a swimming pool with water in Minecraft?

Steps Dig your pool as deep as you want. Filling pools can be difficult, but with this method you can quickly fill a pool of any depth, as long as it is all the same depth. Add a layer one block deep. Add water to the top layer. Dig out the layer of dirt. Add the finishing touches.

### How do I add water to my pool?

How to Add Water to a Pool Step 1 Clean the Pool. Clean your pool by skimming the surface for debris, leaves, twigs and bugs. Step 2 Evaluate the pH. Check the pH of your pool before adding more water. Step 3 Add Water. Use your hose to add water to your swimming pool. Step 4 Test for pH. Step 5 Adjust the Chlorine.

### How much does it cost to fill an above ground pool?

The average cost of a typical 24′ round pool (containing 14,700 gallons) with your water hose is going to cost you about \$80-\$160. These costs are depending where in the country you live and your local water supply markets. You can get exact numbers by calling your local township and they will let you know your rates.