# How long does it take to fill a 10ft pool?

The general rule of thumb is that a single garden hose will raise the water level one inch per hour once the water level has reached the shallow end of the pool. This means that the average pool will fill in 24-72 hours depending on the volume of the pool.

Answer : 2-5 hours, depending on which pool, hose size and water pressure.

how long does it take to fill a 10ft Intex pool? Pump flow rate: 330 gallons, System flow rate: 300 gallons. Ready for water in 10 minutes, simply spread out on level ground, inflate the top ring, fill the pool with water, and enjoy the fun.

Subsequently, one may also ask, how long does it take to fill up a pool?

For others that are filling a much larger pool it could take multiple days until your pool water has reached capacity. Assuming your water pressure is pumping at 8 gallons per minute (480 gallons per hour) through your outside water hose, it would take 31.25 hours to fill a 15,000 gallon swimming pool.

How long does it take to fill a 15ft pool?

Fill It Up At 540 gallons per hour, it will take about nine hours to fill a 5,000-gallon pool with your 1/2-inch hose.

### Do fire departments fill pools?

USING WATER FROM THE FIRE DEPARTMENT It used to be common enough for fire departments to fill swimming pools, but these days you’re quite lucky if you’re able to pull off a request. This could be less expensive than some of the alternatives as some departments will fill your pool or hot tub in exchange for a donation.

### Will my pool fill faster with two hoses?

So when both hoses are on, they fill the pool at a rate of 150 parts per hour. The second hose since it fills the entire pool in two hours, can be said to fill the pool at a rate of 50 parts per hour. So when both hoses are on, they fill the pool at a rate of 150 parts per hour.

### Can you fill a pool overnight?

Hi, with 12″ of water in the pool you should be fine to let it fill all night. The stretching should be done and the liner tight against the wall. If so, let it go. There is some air gap between the liner and the wall in a few areas.

### How much does it cost to fill up a pool?

The average price to fill in an inground swimming pool is between \$3,500 and \$5,000. Read more about pool removal costs: The Homeowner’s Guide to Swimming Pool Demolition and Removal.

### How many gallons is a 16×32 pool?

Above Ground Swimming Pool Water Volumes by Size 12x24ft Oval 5,948 gals 6,797 gals 15x30ft Oval 9,293 gals 10,620 gals 16x32ft Oval 10,573 gals 12,084 gals 18x33ft Oval 12,267 gals 14,019 gals

### How can I fill my pool fast?

Fill your pool until the water reaches about the middle of a surface skimmer, covering the pool water filter inlet slightly. This may take from a few hours to a couple of days, depending on if you are using a garden hose or having your water delivered.

### What is the capacity of my pool?

Length x width x depth x 7.5 = volume (in gallons) Length times width gives the surface area of the pool. Multiplying that by the depth gives the volume in cubic feet. Since there are 7.5 gallons in each cubic foot, multiply the cubic feet of the pool by 7.5 to arrive at the volume of the pool, expressed in gallons.

### How long does it take to fill a 3000 gallon pool?

A: A standard garden hose releases approximately nine gallons per minute. That is roughly 540 gallons an hour. For example, if you have a 20,000-gallon pool, it will take about 37 hours to completely fill. Roughly, it takes about two days to fill your pool completely.

### How long does it take to fill a 12 by 30 pool?

Designed with customers in mind, Intex made this 12×30 above ground swimming pool easy-to-assemble. You get a DVD that includes step-by-step instructions for setup and maintenance. If everything goes smoothly, you should be ready to fill it up with water in about 30 minutes.

### How high should I fill my pool?

Ideal Water Height Most pool professionals agree that the water level in both in-ground and above-ground pools should be at the midpoint of the pool skimmer. The skimmer is responsible for providing a pathway for water to flow to the filter where it is cleaned.

### Can I fill my pool with my well?

If your well water is just OK (meaning it’s a little cloudy and has a bit of an odor), you still may want to fill your pool with it. Certainly this water will take some extra start-up chemicals to get it right, but it’ll still be more cost-effective than filling it with municipal water.

### How long does it take to fill an Olympic swimming pool?

Assuming that the pool has a perfectly flat floor, it would take 1.18M minutes, or 819 days. Bearing in mind, that would be the tap being on full blast and that recommended brushing time is 2 minutes. It would take 300 people brushing their teeth with the water fully on, a year to fill an Olympic pool.

### How do you fill a swimming pool with water in Minecraft?

Steps Dig your pool as deep as you want. Filling pools can be difficult, but with this method you can quickly fill a pool of any depth, as long as it is all the same depth. Add a layer one block deep. Add water to the top layer. Dig out the layer of dirt. Add the finishing touches.